16
When the drop-down selector is used to change the box designation, the list of other boxes is
cleared. In this case just click the detection link again to re-display all the boxes.
After detection, the box setting for each will be displayed as shown above (in the column
labeled “Setting”). When configuring a multi-box system, use the detect link to double-check
that all boxes have different/unique designations. For example, this display of detected
boxes indicates a problem because two boxes are set to the same designation:
In this case, one of the conflicting boxes should be changed to BOX C.
Note that other-box detection in the Multi-Box Setup page works only on networks which fully
support SSDP discovery protocol. Some network configurations do not, in this case use the
Doghouse Utility as an alternative to discover all the boxes on the network and display their
box settings.
More about multi-box channel numbering in the App:
Содержание AudioFetch FETCH12
Страница 30: ...30 ...
