22
3.
In the
PUBLIC ADDRESS
section, select the designated PA channel from the drop-down
list – the example presented below shows Channel 5 selected
4.
Use a mobile device (preferably with earphones), listen to a different channel on the
AudioFetch system, one that has an active audio source (TV, music, etc.), then speak
into the microphone – the microphone’s signal should automatically replace the
TV/music (then the TV/music will automatically return after the microphone becomes
silent)
5.
Adjust the Detection Speed, Detection Threshold, and Hold Time, until the automatic
interrupt/override occurs as desired when someone speaks into the microphone.
a.
Experiment with different settings to become familiar with what they do
6.
Click the Save Settings button to save the new settings
In certain applications the AudioFetch system might be used as a permanent PA system, in this
case enable the Force Override Always checkbox (and then click Save Settings button) – this
causes audio from the designated PA channel to be to always stream to all channels.
Here is an example of Public Address configured with channel 5 as the designated PA channel:
More about the Public Address settings:
The
Detection Speed
setting helps prevent accidental interrupts (random interruptions to the
audio in all other channels) if the PA microphone picks up occasional noise, gets bumped, etc.
Содержание AudioFetch FETCH12
Страница 30: ...30 ...
