CV355-10X Manual
7. DAY / NIGHT
Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO, COLOR,
and NIGHT using the UP or DOWN buttons.
•
MODE:
Set camera to either color mode or B&W mode. (Auto, Day, Night)
•
DAY:
When set to DAY mode, camera stays in color and IR cut filter is engaged.
•
NIGHT:
When set to NIGHT mode, camera stays in B&W and IR cut filter is removed.
1. NIGHT COLOR:
When on, camera stays on color mode. Night (B&W) can be selected
from this mode. (On, Off)
•
AUTO:
When set to AUTO mode, camera changes DAY and NIGHT mode automatically.
1.
DELAY [SEC]:
Delay time between mode change can be adjusted.
2.
D-> N LEVEL:
Adjust the level to switch from Day mode to Night mode.
3.
N-> D LEVEL:
Adjust the level to switch from Night mode to Day mode.
8. AUDIO
Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one sub-
mode using the UP or DOWN buttons.
•
MIC / LINE:
Select MIC or LINE for the audio input source.
•
AUDIO LEVEL:
Select this to adjust audio levels manually.
•
MIC ATTENUATOR:
Audio attenuation can be controlled from this menu to minimize the audio
noise level
•
AGC LIMIT:
Audio gain limit can be controlled while MIC ATTENUATOR is in used.
1. SAMPLE BITS:
Select the bit depth of audio
MAIN MENU
WB CONTROL
>
AE CONTROL
>
FOCUS CONTROL
>
DAY/NIGHT
>
AUDIO
>
BACKLIGHT
>
IMAGE CONTROL
>
SPECIAL
>
SETUP
>
RESET
>
EXIT
DAY/NIGHT
DELAY [SEC]
D->N LEVEL
N->D LEVEL
NIGHT COLOR
RETURN
MODE
MIC ATTENUATOR
AGC LIMIT
SAMPLE BITS
RETURN
OFF
0 dB
OFF
24 BITS
MAIN MENU
WB CONTROL
>
AE CONTROL
>
FOCUS CONTROL
>
DAY/NIGHT
>
AUDIO
>
BACKLIGHT
>
IMAGE CONTROL
>
SPECIAL
>
SETUP
>
RESET
>
EXIT
