e-mail:
voice:
360.854.9559
fax:
866.783.1742
6
VAD-2 Plus Installation and Operation Manual
PROGRAMMING
Item
Address Max Digits
Default
Dial Out Phone Number
11
32
8549559
Example: 1113608549559
Dial Out Phone Number 2
12
32
Empty
Dial Out Phone Number 3
13
32
Empty
Dial Out Phone Number 4
14
32
Empty
Pager Dial Out Phone Number
15
32
Empty
Pager Data
16
16
Empty
Example: 163605551212 (This may be the phone number where the VAD-2
Plus is located)?
NOTE:
You can use the # (pound) key as a 3 second wait. Pager data will be sent
immediately after the pager number is dialed out.
Security (Un-Lock) Code
21
16
123
The code used to un-lock the VAD-2 Plus for control and polling.
Access Code
22
16
456
The code used to enter the remote programming mode. You must call the VAD-2
Plus and enter the remote access code.
Dial List
is a list of the Dial-out phone numbers that will be dialed for a particular
alarm. The numbers correspond to the dial-out address, i.e. 1 = dial-out 1, 2 = dial
out 2, etc, with 5 being the pager dial out number. Pager data will automatically be
appended to the pager dial out number. There are dial lists for input 1, input 2,
Silence monitor, Power fail monitor and over/under temperature monitor.
Input 1 Dial List
23
5
1
Example: 23514 (When input 1 changes state, the VAD-2 Plus will dial the pager
number stored in location 15 followed by the paging data stored in 16, then dial
out in sequence the phone number stored in location 11, then location 14)
Input 2 Dial List
24
5
1
Input 3 SS (Silence Sensor) Dial List 25
5
1
Input 4 PF (Power Failure) Dial List
26
5
1
Temperature 5 Dial List
27
5
1
Item
Address Max Digits
Default
WEBSITE:
Visit our web site for
product updates and
additional information