e-mail:
voice:
360.854.9559
fax:
866.783.1742
5
Status Sentinel Installation and Operation Manual
INSTALLATION
Installation
Status/Digital (OPTO +/-) 1,2,3 input connections
The optically isolated status/digital inputs accept (WET) voltages from 5 to 24 volts
DC. Higher voltages may be applied if an appropriate value external current limit-
ing resistor is used. Connect the positive voltage to the desired “OPTO +” terminal
(anode) and ground or minus voltage to the desired “OPTO –“ terminal (cathode).
NOTE:
Please observe proper polarity.
Connecting (DRY) contact closures to the status/digital input requires the user to
connect the 5VDC terminal to the desired OPTO + terminal. Connect one side of
the external contact closure to the GND terminal and the other side of the external
contact closure to the desired OPTO – terminal.
NOTE:
Please observe proper polarity. The on-board 5VDC power source may be
used to power the (DRY) inputs.
Power LED
Indicates power is applied.
OPTO-Input 1,2,3 LED’s
Illuminates when the appropriate status/digital input is activated.
On-board 5VDC power source
The on-board five-volt DC power source may be used to power the status/digital
input and/or external equipment. The supply is current limited to 100ma.
Connections should be made to the “5VDC” and “GND” terminals.
CHS GND connector
Connect the station ground to this terminal.
Web Setup/Operation
Ethernet “Quick Start” guide
M CAUTION! If you are not familiar with Ethernet enabled equipment, it may be
useful to contact your IT department, network administrator or network consultant
for help. Assigning an IP address already in use by another device may cause prob-
lems with your network! Instructions for changing the IP address of the computer
that will be used for the configuration of this product are given here. Note that these
instructions are specifically for computers with the Windows XP operating system.
For setup using other operating systems, refer to the appropriate OS users manual.
CAUTION!
NEVER DOWNLOAD
FIRMWARE UPDATES
OR CHANGES TO
THE XPORT WEB-
SERVER UNLESS
INSTRUCTED TO DO
SO BY BROADCAST
TOOLS®. DOING SO
DELETES ALL SOFT-
WARE AND VOIDS
ALL WARRANTIES
FROM BROADCAST
TOOLS, INC.
WEBSITE:
Visit our web site for
product updates and
additional information.
