e-mail:
voice:
360.854.9559
fax:
866.783.1742
14
Status Sentinel Installation and Operation Manual
SETUP
HTTP Server Gateway:
Enter the Gateway IP here:
Default: 192.168.1.1
HTTP Port:
Normally Port 80
Default: 80
Site ID:
Enter text to identify the site, location, etc.
SMTP
Server
Address:
The user can enter either an IP address in the
xxx.xxx.xxx.xxx format or a URI in the form:
smtp.comcast.net. In order to resolve the URI, a working
DNS server must be present or it’s IP address entered into
the system.
SMTP Port:
Normally Port 25
Default: 25
Return Address:
Enter your return email here.
NOTE:
The user must enter the following items before an email can be successfully sent:
SMTP Server Address, SMTP Port, Return Address, Host ID and Recipient Address 1. The
test email is sent to email recipient address 1. The user should press the “Save Settings”
button after entering the SMTP information before attempting an email test.
Host ID:
Enter something here, to identify the host.
Logging Email Address:
IP address for the “Logging” email recipient (may be dif-
ferent from the four “Alarm” Recipient Addresses.
Logging Interval (Hours):
This determines how often the input status is emailed. If
set to 0 (zero), no email will be sent.
Default: 1
“Alarm” Recipient Addresses:
Email Recipient 1
Email Recipient 2
Email Recipient 3
Email Recipient 4
Relay Sentinel™ IP Address:
Enter the IP address of the Relay Sentinel™ being used.
Relay Sentinel™ port:
Enter the port of the Relay Sentinel™. Normally 10001
NOTE:
Normally left blank unless paired with the Relay Sentinel™ to form a “Relay
Extension Cord”. The above two entries will need the Relay Sentinel’s IP address and
port number entered in these locations.
Backup DNS Server IP Add:
Enter your DNS address here.
Default: 192.168.1.1
NTP Server Address:
Enter the NTP address here.
Default: pool.ntp.org
NTP Port:
Default: 123
