e-mail:
voice:
360.854.9559
fax:
866.783.1742
13
Status Sentinel Installation and Operation Manual
SETUP
NOTE:
By enabling the ON and/or OFF monitoring and NOT enabling an
email box, the device will log the events, but not send an email. If the device is exit-
ing a OFF alarm condition, then the email addresses used will be those notified when
the OFF alarm condition was entered.
Page Refresh Time:
This option specifies how often the web page is automatical-
ly refreshed in seconds.
NOTE:
After any item has been changed, you MUST press the “Save Settings” but-
ton for your changes to be saved.
“Email/Network Setup” Web Page
Restoring Network Factory Defaults
The Status Sentinel™ factory defaults may be restored by shorting pins 3 & 4 on the
module RJ11 jack while powering up the product. Remove the short after 3 seconds.
HTTP Server Address:
Enter a static IP address here. Default: 192.168.1.55
HTTP Server Net mask:
Enter the Net mask here:
Default: 255.255.255.0
WEBSITE:
Visit our web site for
product updates and
additional information.
