LBH-SDI-EAD-T User’s Manual
Link Bridge
TM
HDBT SDI Video ConvertingTransmitter System
Broadata Technical Support, (800) 214-0222
4
EEC Safety Compliance:
These products meet the requirements of EN 60601-1:2005 so as to conform
to the Medical Device
Directive 93/42/EEC (general safety information) as amended by 2007/47/EC.
This equipment is energized from 100-240 VAC 50 / 60 Hz power source. It is
the responsibility of the installer to ensure that the equipment is installed in
accordance with applicable hospital, local and national electrical codes. An
additional multiple socket-outlet or extension cord shall not be connected to
the system
To power unit down, remove power cable from unit or disconnect power cord
from power receptacle. The power supply or the appliance coupler is the only
recognized disconnect device, disconnect the power supply from the AC mains.
Do not position the equipment so that is it is difficult to access the appliance
coupler.
Class II Medical System
No Applied Parts
IP20
LBH Power Supply:
80275-2401 [email protected] Power Supply
For medical applications must use:
MPS-24V 30W-BP (BCI-80275-2475): BridgePower 24V D/T 2.5mm 100-
240V~, 50-60Hz 1.0A LCK MED
MPS-24V-50W-GLT (BCI-80275-2421): GlobTek 24V D/T 2.5mm 100-240V~,
50-60Hz 1.6A LCK MED
Power Cord:
Use a hospital grade power cord with the correct plug for your
power source.
Recycling:
Upon termination of the service life of this product please return unit to the
manufacturer for proper waste disposal, or f
ollow local governing ordinances
and recycling plans regarding the recycling or disposal of this equipment , or
contact the Electronic Industries Alliance (www.eiae.org).
Declarations of Conformity
FCC and Council Directives of European Standards:
This device complies with Part 15 of FCC rules and 93/42/EEC of the Council
Directives of European Standards Directive as amended by 2007/47/EC.
Operation is subject to the following two conditions: (1) This device may not
