LBH-SDI-EAD-T User’s Manual
Link Bridge
TM
HDBT SDI Video ConvertingTransmitter System
Broadata Technical Support, (800) 214-0222
22
4.0 MAINTENANCE AND TROUBLESHOOTING
4.1 Maintenance
There is no operator maintenance other then keeping the units
clean. However, observe the following light indicators to make
sure that the unit is working properly:
4.2 Troubleshooting
If the LBH-SDI-EAD-T units do not operate properly after
installation, check for possible cable breaks, loose connections,
and incorrect cable connections. If problems persist that may
be fiber related, contact BCI at 1-800-214-0222 for further
assistance.
For electrical problems, perform the following troubleshooting
procedures:
1.
If the POWER indicator is OFF, check for the following:
a.
The line cord is plugged into the unit and your outlet
has power.
2.
If the POWER indicator is ON, but the Link indicator is
OFF, check for the following:
a.
Make sure the appropriate CAT-5e/6 are being used.
b.
Cable and RJ45 connectors are not broken.
c.
For each unit, the transmit (TX) cable is connected to
the other unit’s receiver (RX).
3.
If the POWER indicator and HDBaseT Link indicator
are ON, but the audio/video channels are not
operating, then:
a.
Check to see that the attached user equipment is turned
on.