LBH-H-T/R-EAD-ICP User Manual
Link Bridge
TM
HBaseT HDMI Transmission System w/External Audio and Inline Control Processor
Broadata Technical Support, [email protected]
25
UserName
: Enter user name required for log in. Leave blank if there is
no username.
Password Prompt
: Enter password prompt from telnet server. Leave
blank if there is no password prompt.
Password
: Enter password required for log in. Leave blank if there is
no password.
Command Prompt
: Enter command prompt from telnet server. Only
the last 9 characters of the command prompt are needed. Leave blank
if there is no command prompt.
Note: Check box below if stgring is used as a one-time greeting.
Commands
: Enter the command string to be transmitted. Up to four
command strings can be transmitted at one time.
Note: Check box below if the response to one of the commands is used
as an auto trigger.
Tx Spacing
: Enter the delay (seconds) before command is transmitted.
Enter 0 if no delay is desired.
Connection Timeout
: Enter the timeout (default is 10 seconds). The
connection timeout is the time the ICP will wait before it terminates the
telnet connection with the server due to no response.
