5
C.
D.
A.
B.
Slide O-ring (1) over cartridge and the bonnet
nut (2). The O-ring, which acts as a spacer to
steady the sleeve, should rest behind the
bonnet nut.
If your model requires a spacer (1), install it into
sleeve (2). Slide the sleeve over the cartridge, body
and O-ring. Ensure sleeve is properly positioned
over the front of cartridge.
Secure the escutcheon (1) to the bracket (2) with
the 2 screws provided (3). Do not overtighten
escutcheon screws.
Slide trim ring (1) over the cartridge and sleeve
and into the escutcheon. Install volume control
handle (2) with lever pointed downward to 6
o’clock position. Install set screw (3) into handle.
Push handle onto valve cartridge and tighten set
screw to secure handle.
3
Valve Trim Installation
1
2
2
1
2
2
3
60 Series Installation
1
1
3
