background image

Rinnai 27 

Ducted Gas Heater OM

Q. 

Can a filter be fitted to my return air grille?

If fitment of supply air filters is desired, consult the product dealer to confirm compatibility with airflow requirements. 

(When fitted, ensure that the air filter(s) are regularly cleaned and maintained.)

Q. 

What does duct cleaning entail?

Duct cleaning entails the following:

• 

Remove dust from the heating system.

• 

Kill any potential dust mites living and breeding throughout the heating system.

• 

Remove odours from the heating system.

• 

Remove pet hair from the heating system.

• 

Help improve indoor air quality.

• 

Allergy sufferers may benefit from clean ducts.

• 

Assess if a return air filter is installed (if installed, clean).

• 

Clean return air grille and duct.

• 

Clean the heater fan and assembly.

• 

Clean the supply air register and boots.

Q. 

How much condensate does my SP6 model produce?

Approximately 2 to 3 litres per hour of condensate may be produced under continuous running conditions, depending 

on the size of the heater.

Q. 

On my programmable wall control unit, I turn the fan on but nothing happens. Why?

This facility can be added, however the installer should be asked to add this connection.

Q. 

Why does my heater come on early when using a Programmable thermostat?

The thermostat may have a feature (adaptive recovery) that learns how long it takes for the house to warm up. It 

then uses this knowledge to turn the heater on early so that the house has already reached the set temperature at 

the start of the period. Ask the installer to disable this feature if it is not required.

Содержание BX5 Series

































Отзывы: