Rinnai 17
Ducted Gas Heater OM
8. Manual Operation
8.1
Operate the System with Manual Settings
Note:
When operating the system manually, time settings are not used because the heater is manually turned on and off.
Bypass the AUTO settings and operate the heater manually, as follows:
a.
Turn the networker off.
b.
If other appliances are installed on the network, press the mode button until
Heating
displays.
c.
Turn the networker on and press the AUTO button until
Manual
displays. The set temperature displays at
the top left of the screen and the current room temperature at top right. If zone features are installed, zone
keys 4 and 5 are active and zones can be selected.
d.
Use the rotary dial to adjust the set temperature as desired.
Note:
The heater will not switch on until the current room temperature falls below the set temperature.
e.
Use Keys 4 and 5 to select the zones to operate.
f.
Press the on/off button to turn the system off.
Note:
When manual operation is next selected, the networker will operates using these settings.
