Brivis B063047, Руководство по установке

Страница: 8 / 20

7
Diagram 7: Mounting Brivis Touch to Backing Plate
2.5 Install Interface Module
The Interface Module facilitates communication between the
Brivis Touch and the Brivis appliance(s) through the P&C Loom ,
and is capable of connecting up to four Brivis Touch units.
The Interface Module requires a 12VDC power supply from the
Power Transformer .
The Interface Module also has an “ Isolation Switch ”; a red
“ Status L.E.D ” indicates it is ON, refer to Diagram 8.
Diagram 8 : Mounting Interface Module
Power & Communication
Loom Connection,
(Any of the four ports)
Transformer
connection
Isolation
switch
Status
L.E.D
2-wire bus
connection
T
W
1
T
W
2
T
W
1
T
W
2
Male Clips