1
Brivis Touch Controller Kit
Scope
Please read these instructions carefully before installing this
product. This manual covers the installation of the wall mounted
Brivis Touch Controller
for the following Brivis applications:
Gas Ducted Heating
Gas Ducted Heating & Refrigerated Cooling (Dual Comfort)
Evaporative Cooling
Zoning, including Brivis ZonePlus
For the installation of Brivis Heating and Cooling products please
refer to the equipment Installer Manuals.
This manual is based on Australian Standards - for all other
applications, please refer to relevant local codes and regulations.
Any deviations from these instructions may, at the discretion of
Brivis, void the warranty. As a result, the customer and/or installer
may be charged a fee for non-product warranty related call outs.
Also, note that failure to comply with these instructions may
preclude Brivis from being able to service the product.
Terminology:
Shall:
Indicates a mandatory requirement of this manual.
Should:
Indicates a recommended requirement of this manual.
Disclaimer
IMPORTANT NOTICE: This document is a guide only. Laws, regulations and industry standards can
vary between States and Territories. Accordingly, this guide must be read in conjunction with, and
subject to, all laws, regulations and industry standards applicable in the State or Territory in which the
products are installed. You must ensure that the installation of the products will comply with
those laws, regulations and standards, and that the products recommended to customers are
fit for the purpose for which they are intended.
Table 1: Brivis Touch Controller Kit Brivis Part No. B063047
Contents and Description
Qty
Brivis Touch Controller
1
Interface Module
1
Power Transformer
1
Power & Communication Loom
1
Plug & Screw Kit (for Brivis Touch)
1
Screw (for Interface Module)
2
Screw Driver
1
Inspect the product to ensure it matches your order. In the event of
damage or incorrect delivery, notify the supplier immediately. Brivis
accepts no responsibility for installation of damaged or incorrect
product.
Please read these installation instructions before undertaking the
installation process.
Specifications subject to change without notice.
Pictures for illustration purposes only.
© Brivis Climate Systems Pty Ltd 2016
The Brivis Touch Controller is compatible with selected Brivis
units only. For information on compatibility please contact Brivis.
Pre-2010 compatible Brivis heaters will have limited on-board
diagnostics.
Содержание B063047
Страница 1: ...Brivis Touch Controller Installer Manual ...
