PAIRING
This process is to match the parent unit with baby unit so that they can communicate with each
other while no other devices (even baby monitor of identical model) can interfere with you or
receiving your signal.
The baby and parent unit are already paired with factory preset code when they are shipped from
factory. However, we recommend to perform pairing again to achieve better privacy:
1.
2.
3.
4.
5.
First press and hold the button of parent unit.
Set the power ON-OFF switch to ON position and wait until the Temperature indicator
show a flashing.
Now press and hold the button of baby unit.
Set the power ON-OFF switch to ON position and wait until the Tx indicator starts
flashing.
Release button and then press and hold button again.
14
15
3
3
3
4
8
20
PARENT UNIT
RAPID
CHARGER
BABY UNIT
1. Night Light
2. Microphone Sensitivity/Volume Up Button
3. Microphone Sensitivity/Volume Down Button
4. Power ON-OFF and Night Light switch
5. Microphone
6. Speaker
7. Rx indicator
8. Tx indicator
9. Power on/battery low indicator
10. Volume control button
11. Temperature sensor
12. Charger contact plates
13. Volume Up button
14. Volume Down button
15. Power ON-OFF and vibration switch
16. LED level meter
17. Tx indicator
18. Vibration indicator
19. Power on/battery low indicator
20. Temperature indicator
21. Microphone
22. Speaker
23. Talk back PTT button
24. DC jack (optional)
25. Charger contact plates
26. Charger DC jack
27. Charging indicator
CONTROLS LAYOUT
EN
Содержание BC-50
Страница 2: ......