Britpart DA4512, Инструкция по эксплуатации

Страница: 9 / 20

Operation
Ty r e P r e s s u r e M o n i t o r i n g S y s t e m
9
System Operation
The system enters into working status after installation. With ACC ON the system starts self-test then displays the inside pressure
and temperature of each tyre for 2 seconds. If all tyres are in good condition, the display will go off automatically, the status
indicator (LED) turns green. Otherwise the buzzer will sound 3 times with the indicator in orange or red and the display will show the
relevant information, the buzzer will sound 3 times every 3 minutes until the problem is rectified.
Press SCAN to read the data of each tyre.
Press SET 3 seconds to convert the temperature units - ºC to ºF
When the ACC ON cut off the power supply, the system is still in monitoring state but will not alarm
Front right wheel Power Sensor signal High temperature Temperature Temperature unit
Rear right wheel Air leakage Tyre pressure Pressure unit Status indicator
Front left
wheel
Rear left
wheel
Scan
Set