Britpart DA4512, Инструкция по эксплуатации

Страница: 17 / 20

Function Setting
- continued
Ty r e P r e s s u r e M o n i t o r i n g S y s t e m
17
Learn ID by Low Frequency
This function is only supported by the ID Reading Controller by our company. Otherwise, ID learning by low frequency will not be
realised.
(c) Use the Reading Controller to
read out ID of all wheels needed to
be installed or updated and then
send out the data.
(d) The original ID will be replaced
when the system received all the
new data, the setting is finished.
Press SCAN to quit the setting
mode and keep the original setting
unchanged. The system will enter
into next setup interface after
setting or automatic quitting.
(b) Press SET to enter the LF Learn
ID mode, the system will indicate the
position of all the wheels, waiting for
the data from the Reading
Controller.
(a) Enter setup mode and select the
interface of LF Learn ID.