Britpart DA4512, Инструкция по эксплуатации

Страница: 7 / 20

Sensor Installation
> Discharge the wheel, press the tyre around the valve by tool to fix the sensor.
> Remove the original air valve.
> Install the sensor - the hole for air must not be jammed.
> Fix the sensors to the corresponding wheel -
No. 1 is front left wheel; No. 2 is front right wheel; No. 3 is rear right wheel and No. 4 is rear left wheel
> Install the tyre and charge it with air to normal pressure, then turn it to balance it.
> Install the wheel.
Installation
Remove the original
air valve.
Ty r e P r e s s u r e M o n i t o r i n g S y s t e m
7
Fix the sensor.
Charge the tyre to
standard pressure
then balance the
wheel.
Tighten the screw in
the sensor according
to clockwise direction
by screwplate.