Briteq LED UV-GUN 100W, Руководство по эксплуатации

Страница: 7 / 10

ENGLISH USER MANUAL
BRITEQ
®
5/7 LED UV-GUN 100W
HOW TO SETUP:
MAIN MENU:

To select any of the menu options, press the [MENU] button to enter the setup menu.

Use the
▲/▼ buttons to change the parameters of the selected mode.

To return to normal working mode: press the [MENU] button one or two times.
Addr
DMX512 Address Setting
Used to set the start address in a DMX setup.

Press the
▲/▼ buttons until Addr
is shown on the display.

Press [ENTER] to confirm.

Use the
▲/▼ buttons to change the DMX512 address.

Press [ENTER] to confirm.
Chmd
Channel mode
Used to set the desired channel mode.

Press the
▲/▼ buttons until ChMd
is shown on the display.

Press [ENTER] to confirm.

Use the
▲/▼ buttons to select:

1 Ch
: 1channel mode, only dimmer 0-100%

2 Ch
: 2channel mode, dimmer 0-100% + strobe

Press [ENTER] to confirm.
bLmd
Channel mode
Used to set how the projector reacts when the DMX-signal suddenly disappears.

Press the
▲/▼ buttons until bLMd
is shown on the display.

Press [ENTER] to confirm.

Use the
▲/▼ buttons to select:

Soun
: output sound activated when no DMX is detected

FrEE
: output based on the last valid DMX-signal is kept on the projector

nuLL
: [BLACKOUT]-mode output turns black while no DMX is detected

Press [ENTER] to confirm.
dinn
STANDALONE use (without DMX-control): dimmer mode
Used to adjust the output manually.

Press the
▲/▼ buttons until dinn
is shown on the display.

Press [ENTER] to confirm.

Use the
▲/▼ buttons to change the output between 00
(no output) and
99
(full output).

Press [ENTER] to confirm.
Soun
STANDALONE use (without DMX-control): sound activated mode
Used to adjust the audio sensitivity while used in sound mode.

Press the
▲/▼ buttons until Soun
is shown on the display.

Press [ENTER] to confirm.

Use the
▲/▼ buttons to change the sensitivity between 00
(low) and
99
(high).

Press [ENTER] to confirm.
SLAU
SLAVE MODE
When you have one projector working in standalone mode (without DMX controller), you can connect
other UV projectors to this unit and put them in SLAVE mode. The output of the slaves will be an
exact copy of the master.

Press the
▲/▼ buttons until SLAU
is shown on the display.

Press [ENTER] to confirm.
uEr
Software version
Used to show the current version of the firmware.

Press the
▲/▼ buttons until uEr
is shown on the display.

Press [ENTER] to show the actual version number in the projector.