ENGLISH
USER MANUAL
BRITEQ
®
3/7
LED UV-GUN 100W
DESCRIPTION:
1. BRACKET:
with knobs on both sides to fasten
the unit and a mounting hole to fix a mounting
hook.
2. SAFETY EYE:
used to attach a safety cable
when the unit is rigged, see paragraph
“overhead rigging”
3. Mains input:
equipped with a 1m mains cable.
4. Fuse holder:
always replace a damaged fuse
with a fuse of the same type and electrical
specifications!
5. DMX IN:
used to daisy chain the projector with
other units that will be controlled by a DMX-
controller. The DMX-input is also used to update
the firmware of the projector, see the upgrade
instructions on our website.
6. DMX OUT:
used to daisy chain the projector with
other units that will be controlled by a DMX-
controller.
7. DISPLAY:
shows the various menus and the
selected functions. (turns off automatically)
8. MENU-button:
used to browse the different
menu options or to exit a menu option.
9. ENTER-button:
used to select a menu option or confirm a setting.
10.
▲-button:
used to go to the previous menu option or to increase a parameter value.
11.
▼-button:
used to go to the next menu option or to decrease a parameter value.
OVERHEAD RIGGING
Important:
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
Don’t cover any ventilation openings as this may result in overheating.
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
