ENGLISH
USER MANUAL
BRITEQ
®
6/9
BT-NONAMOVE
[SET CONFIG > DISPLAY > Temp C/F]
Used to select if the LED-temperature is shown in degrees Celcius [°C] or Fahrenheit [°F].
•
Press the encoder wheel to select the desired menu item.
•
Turn the encoder wheel to select the desired option: [Celcius / Fahrenheit]
•
Press the encoder wheel to confirm.
[INFORMATION] menu
Menu with all functions related to information about the status of the fixture.
[INFORMATION > TIMERS]
Shows time related information.
•
Turn and press the encoder wheel to show the information:
•
[Total Time]
non resettable timer that shows the total working hours of the machine.
•
[Last JOB]
resettable timer that shows the working hours during the last job.
•
Press the encoder wheel or [MENU/ESC] button to return.
[INFORMATION > PIXEL / RGB Temp.]
Shows actual LED temperature information.
•
Turn and press the encoder wheel to show the information.
•
Press the encoder wheel or [MENU/ESC] button to return.
[INFORMATION > ERROR Info]
Shows actual ERROR information.
•
Turn and press the encoder wheel to show the information.
•
Press the encoder wheel or [MENU/ESC] button to return.
[INFORMATION > DMX values]
Shows actual DMX values received from the DMX-controller.
•
Turn and press the encoder wheel to show the information, scroll down to see the values of all channels.
•
Press the encoder wheel or [MENU/ESC] button to return.
[INFORMATION > Model Name]
Shows model name of the unit.
•
Turn and press the encoder wheel to show the information.
•
Press the encoder wheel or [MENU/ESC] button to return.
[INFORMATION > Firmware V.]
Shows actual firmware version information.
•
Turn and press the encoder wheel to show the information:
•
1U + 2U firmware versions of BT-NONAMOVE
•
Firmware version of the connected BT-NONABEAM
•
Press the encoder wheel or [MENU/ESC] button to return.
[TEST / RESET] menu
[TEST / RESET > Reset PAN/TILT]
Used to force a [PAN/TILT] reset.
•
Press the encoder wheel to select the desired menu item.
•
Turn the encoder wheel to select the desired option.
•
Press the encoder wheel to confirm.
