ENGLISH
OPERATION MANUAL
BRITEQ
®
7/12
BT-COLORAY MULTI
•
[YELLOW]
•
[GREEN]
•
[CYAN]
•
[BLUE]
•
[PURPLE]
•
[SET]
this is a color that can be set by the user. Follow these steps:
•
Press the [ENTER] button: the display shows the value (000-255) for RED. (use
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (000-255) for GREEN. (use
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (000-255) for BLUE. (use
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (000-255) for WHITE. (use
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (000-099) for STROBE. (use
▲/▼buttons)
•
Press the [ENTER] button to save your setting.
[MASTER DIM]
Used to set the master dimmer while used as master.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼buttons to select the desired level for the master dimmer. (please note that the last selected
static color will be used to set the value)
•
Once you have the desired level, press the [ENTER] button to save it.
Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.
[WHITE BALANCE]
Used to set the white balance or to perfectly match the colors of several projectors.
•
Press the [MENU] but
ton or ▲/▼buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the display shows the value (050-255) for RED. (change with
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (050-255) for GREEN. (change with
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (050-255) for BLUE. (change with
▲/▼buttons)
•
Press the [ENTER] button: the display shows the value (050-
255) for WHITE. (change with ▲/▼buttons)
•
Once you have set the desired levels, press the [ENTER] button to save them.
Note: the setting of this option affects all color settings, static colors and DMX-controlled colors.
[DIMMER CURVE]
Used to set the dimmer curve of the master dimmer.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼buttons to selected the desired curve:
•
Once you have the desired curve, press the [ENTER] button to save it.
[DIM SPEED]
Used to select the reaction time of the projector.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼buttons to select the desired value: (between 000 (0 ms) and 255 (2 sec)
•
[000-00ms]
The projector follows the instructions instantly, no delay.
•
[255-2.0s]
The projector imitates the behavior of a halogen lamp (slower reaction time).
•
Once the correct option shows on the display, press the [ENTER] button to save it.
[LOCKING]
Used to lock the setup menu against unwanted altering of the settings.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
