Briteq BT-COLORAY MULTI, Руководство по эксплуатации

Страница: 10 / 16

ENGLISH OPERATION MANUAL
BRITEQ
®
8/12 BT-COLORAY MULTI
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼buttons to select the desired mode:
•
[OFF] The setup menu can be used at any time.
•
[ON] After a short time the setup menu locks automatically, the display shows [ LOCKED ***** ].
Unlock the display by pressing the buttons in this order: UP, DOWN, UP, DOWN, ENTER .
•
Once the correct option shows on the display, press the [ENTER] button to save it.
[NO DMX FREEZE]
Used to set how the projector reacts when the DMX-signal suddenly disappears.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼buttons to select the desired mode:
•
BLACKOUT output turns black while no DMX is detected.
•
FREEZE: output based on the last valid DMX-signal is kept on the projector.
•
Once the correct option shows on the display, press the [ENTER] button to save it.
Note: as soon as the input detects a DMX-signal, blackout or freeze mode will be cancelled.
[DEFAULT SETTINGS]
This is your emergency exit if you really messed up the settings: just return to factory settings.
Also user settings can be saved/loaded.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use ▲/▼buttons to selected the desired settings:
•
[FACTORY]
•
[USER]
•
Press the [ENTER] button:
•
[FACTORY] was selected: the display shows [LOAD]
•
Press the [ENTER] button.
•
Use ▲/▼buttons to select [YES / NO]
•
Press the [ENTER] button to confirm.
•
[USER] was selected:
•
Use ▲/▼buttons to select [LOAD / SAVE]
•
Press the [ENTER] button to confirm.
•
Use ▲/▼buttons to select [YES / NO]
•
Press the [ENTER] button to confirm.
•
[SAVE] was selected: the current settings of the setup menu are saved to memory.
•
[LOAD] was selected: the previously saved settings are loaded.
Default factory settings:
PARAMETER name Defaults factory USER defaults 1 USER defaults 2
DMX Channel mode CH06 Current setting in the menu Current setting in the menu
AUTO RUN Chase repeat SP=50 R=5 Current setting in the menu Current setting in the menu
EFFECT MODE
CFADE
SP=50 F=00
Current setting in the menu Current setting in the menu
CUSTOM Static color [COLOR WW] Current custom color settings Current custom color settings
MASTER DIM 100% Current setting in the menu Current setting in the menu
WHITE BALANCE RGBW = 255 Current white balance settings Current white balance settings
DIM Curve [SQUARE] Current setting in the menu Current setting in the menu
DIMSPEED [100-0.4s] Current setting in the menu Current setting in the menu
Locking OFF Current setting in the menu Current setting in the menu
No DMX mode [FREEZE] Current setting in the menu Current setting in the menu
[LED TEMP]
Used to show the current temperature of the LED.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
[FIRMWARE VERSION]
Used to show the current version of the firmware.
•
Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.
The firmware of this unit can be upgraded using the Briteq Firmware updater 2