ENGLISH
USER MANUAL
BRITEQ
®
3/18
BT-CHROMA800
DESCRIPTION:
1.
MAINS IN / OUTPUT:
there are 2 versions:
•
Standard version (for stage/rental use):
Equipped with connectors, connect the supplied mains
cable here, you can daisy chain up to max. 3 units. Input and output are connected to each other
without any fuse.
•
Fixed installation version:
This is an optional module with waterproof cable glands. You can easily
install a power cable with loose, stripped wire ends. (see electrical installation)
Hint: Please check our website for special cable assemblies that contain both power (3x1.5mm² with
Neutrik PowerCON
®
TRUE1) and balanced signal (XLR 3pin) in one cable. Different lengths are
available: 1.3m, 3m, 5m and 10m, very convenient!
2.
DMX IN/OUTPUTS:
there are 2 versions:
•
Fixed installation version:
This is an optional module with waterproof cable glands. You can easily
install a DMX-cable with loose, stripped wire ends. (see electrical installation)
•
Standard version (for stage/rental use):
Equipped with connectors, connect good quality balanced
signal cables with 3pin or 5pin XLR-connectors.
3. DISPLAY & BUTTONS:
alphanumeric OLED-display and waterproof touch keys to select different options
of the setup menu:
•
MENU-button:
used to browse the different menu options or to exit a menu option.
•
▼-button:
used to go to the next menu option or to decrease a parameter value.
•
▲-button:
used to go to the previous menu option or to increase a parameter value.
•
ENTER-button:
used to select a menu option or confirm a setting.
4. ANTENNA:
antenna needed for wireless DMX-signal reception.
5. COOLING FANS:
due to the high power it is very important to make sure that the temperature-controlled
fans and ventilation openings always remain free to maintain optimal cooling!
6.
LOCKING TILT MECHANISM:
serrated 180° mechanism with tilt angle display, there are 2 versions:
•
Standard version (for stage/rental use):
a metal knob is used to adjust the tilt position easily,
without using tools.
•
Fixed installation version:
a stainless-
steel hex socket bolt (included in the optional “
BT-CHROMA
800 - FIX install set
”) is used to assure that the tilt position cannot be altered easily.
7. HANDLE:
to carry and adjust the projector easily.
8. FILTER FRAME:
thanks to the use of strong magnets the frame can be exchanged easily, without the
need for tools. Also check point 13! For fixed installation the frame can be fixed using screws to avoid theft.
You can easily install different optional filters and beam shapers in the frame.
9. AIR PRESSURE VENT:
for improved performance and service life, this special vent equalizes the
pressure inside the projector while blocking water and preventing condense from being formed.
10. FIXING HOLES:
these Ø13mm holes on both sides of the base are used to fix the projector firmly while
used for permanent installation.
11. OMEGA BRACKET HOLES:
for rental use, these holes with 106mm spacing are adapted to install 1 or 2
OMEGA brackets (small model).
12. SAFETY HOLE:
used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”.
13. FILTERFRAME SAFETY CABLE:
A small safety cable is included to secure the filter frame when it is
used with the magnetic holders.
