ENGLISH
USER MANUAL
BRITEQ
®
9/18
BT-CHROMA800
Default values:
PARAMETER name
FACTORY defaults
USER1 defaults
USER2 defaults
CHANNEL Mode
RGBL + FX (11CH)
Current setting in the menu
Current setting in the menu
W-DMX ON/OFF
ON
Current setting in the menu
Current setting in the menu
NO DMX Mode
Freeze
Current setting in the menu
Current setting in the menu
Display FLASH
ON
Current setting in the menu
Current setting in the menu
Display AUTOLOCK
OFF
Current setting in the menu
Current setting in the menu
Pixel Order
Standard 0°
Current setting in the menu
Current setting in the menu
DIMMER Speed
100
Current setting in the menu
Current setting in the menu
DIMMER Curve
Square
Current setting in the menu
Current setting in the menu
FAN Speed
AUTO
Current setting in the menu
Current setting in the menu
Working Mode
All Pixels ON
Current setting in the menu
Current setting in the menu
Program Speed
128
Current setting in the menu
Current setting in the menu
Master Dimmer
255
Current setting in the menu
Current setting in the menu
Color Effects
Color Fade 75
Current setting in the menu
Current setting in the menu
Custom Color RGBL
NO factory default
Current setting in the menu
Current setting in the menu
Afterglow
80
Current setting in the menu
Current setting in the menu
LED Calibration
NO factory default
LED calibrations are saved
LED calibrations are saved
Temp Units C/F
Celsius
Current setting in the menu
Current setting in the menu
INFORMATION menu
DMX CH. Values
Used to monitor the incoming DMX-signals, handy for fault debugging.
•
Press the ▼/▲ buttons to browse the menu until the required function shows up.
•
Press the ENTER button: you can monitor the incoming DMX-signal, functions and values are displayed.
LED Temperature
Shows the current LED Temperature.
•
Press the ▼/▲ buttons to browse the menu until the required function shows up.
•
Press the ENTER button: the current LED temperature is shown.
TOTAL Usage Time
Shows the Total time the projector was switched on, starting from the 1
st
day it was used.
•
Press the ▼/▲ buttons to browse the menu until the required function shows up.
•
Press the ENTER button: the TOTAL usage time is shown, this value cannot be reset.
JOB Usage Time
Shows the Total time the projector was switched on since the last JOB Time reset. Can be used to
check how long a customer used the projector on a job.
•
Press the ▼/▲ buttons to browse the menu until the required function shows up.
•
Press the ENTER button: the job usage time is shown, this value can be reset in a hidden menu.
ERROR Messages
Shows eventual ERROR messages if they exist.
•
Press the ▼/▲ buttons to browse the menu until the required function shows up.
•
Press the ENTER button: under normal conditions the display shows
“None”
Firmware Version
Shows actual firmware version information.
•
Press the
▼/▲ buttons to browse the menu until the required function shows up.
•
Press the ENTER button: the current firmware version of the 1U processor is shown.
•
Press the ▼/▲ buttons to browse the firmware versions of the other processors.
Note: The firmware of this unit can be upgraded using our special
“Firmware Updater 2+” (separately available
from Briteq). More information about this can be found in the user manual of the firmware updater or our
website:
https://briteq-lighting.com/firmware-updater-2-plus
