Briteq B06030 Скачать руководство пользователя страница 8

ENGLISH 

 

OPERATION MANUAL 

 

BRITEQ

®

 

6/12 

BT-THEATRE 200TW

 

BEHAVIOR  

Used to select the reaction time of the projector. 

 

Press the ▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired mode: 

 

[LED]

 

 

The projector follows the instructions instantly, no delay. 

 

[HALOGEN]

 

The projector imitates the behavior of a halogen lamp (slower reaction time). 

  Press the [ENTER] button to save the setting. 

 

LED CCT  

Used to set the standard LED CCT (color temperature) while used in a mode that has no CCT-setting. 

  Press the 

▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired CCT: 

 

2800K

 

warm white, comparable to halogen lamps: theatre applications

, … 

 

3000K

 

warm white, comparable to halogen lamps: theatre applications

, … 

 

3200K

 

warm white, comparable to halogen lamps: theatre applications

, … 

 

4000K 

natural white, comparable to metal halide lamps: exhibition stands, shops

, … 

 

4300K 

natural white, comparable to fluorescent lamps: exhibition stands, shops

, … 

 

5600K 

Daylight white: TV-recordings, exhibition stands, shops

, … 

 

6000K 

Cool white: TV-recordings, exhibition stands, jewelry shops

, … 

  Press the [ENTER] button to save the setting. 

Note: in several DMX-modes you can use the CCT-channel to select any CCT between 2800K and 6000K. 
 

PWM FREQ 

Used to set the LED refresh rate and avoid flicker in video recordings. 

 

Press the ▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired refresh rate frequency: 600Hz to 4800Hz (8 positions) 

  Press the [ENTER] button to save the setting. 

 

LOCKING  

Used to lock the setup menu against unwanted altering of the settings. 

  Press the 

▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired mode: 

 

[OFF]

 

The setup menu can be used at any time. 

 

[ON]

 

After a short time the setup menu locks automatically, the display shows [

LOCKED *****

]. 

Unlock the display by pressing the buttons in this order: 

UP, DOWN, UP, DOWN, ENTER

  Press the [ENTER] button to save the setting. 

 

NO DMX  

Used to set how the projector reacts when the DMX-signal suddenly disappears. 

  Press the 

▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired mode: 

 

BLACKOUT 

output turns black while no DMX is detected.

 

 

FREEZE:  

output based on the last valid DMX-signal is kept on the projector.

 

 

MANUAL:

 

output and CCT can be set manually with the encoder knob (see 11)

 

  Press the [ENTER] button to save the setting. 

Note: as soon as the input detects a DMX-signal, the DMX-signal will control the unit. 
 

DISPLAY BLINK 

Used to select if the display should blink or not when the DMX signal was lost. 

 

Press the ▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired mode: ON / OFF 

  Press the [ENTER] button to save the setting. 

 

FAN SET 

On some occasions fan noise should be reduced to a minimum. Therefore, you can set three different 
fan speed modes.  

 

Press the ▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. 

 

Use ▲/▼ buttons to select the desired mode: 

 

[AUTO]:

  the  fan  speed  will  be  automatically  adjusted  to  always  have  the  best  balance  between  fan 

noise and performance (light output). This is the best setting for use in theatres, conference rooms, … 

Содержание B06030
















Отзывы: