Briteq B06030, Руководство по эксплуатации, Страница: 11 / 15

ENGLISH OPERATION MANUAL
BRITEQ
®
9/12 BT-THEATRE 200TW
RDM FUNCTIONS / REMOTE SETUP
RDM
means “
R emote D evice M
anagement”. This projector works with a brief set of RDM-functions which
means that it can setup a bi-directional communication with an RDM-compatible DMX-controller. Some of
these functions are briefly explained below, others will be added in the future.
•
The DMX-
controller sends out a “discovery command”, all RDM devices respond and send their unique
device ID.
•
The DMX-controller asks each RDM device for some basic data so it knows which devices are connected.
The projector will respond:
•
Device name: BT-THEATRE 200TW
•
Manufacturer: Briteq
®
•
Category: LED Dimmer
•
Firmware: x.x.x.x (firmware version of the projector)
•
DMX address: xxx (current DMX start address of the projector)
•
DMX footprint: xx (number of DMX-channels used by the projector)
•
Personality: xx (current personality [or DMX-working mode] used by the projectors)
•
The DMX-controller can send certain commands to each RDM device which allow remote setup of the units.
Thanks to this the projector can be setup remotely.
The following functions can be managed remotely:
No more need to take a ladder and set all units one by one!
•
DMX START ADDRESS: The start address can be set remotely from 001 to xxx.
•
PERSONALITY: The DMX working mode (DMX-chart) can be set remotely.
These 2 functions make it possible to prepare a complete DMX-patch of all projectors on the DMX-controller
and send these data to all projectors at once. More functions will be added later.