Briteq B04751, Руководство по эксплуатации

Страница: 9 / 12

ENGLISH OPERATION MANUAL
BRITEQ
®
7/8 BT-BUBBLEFOG
11 CHANNEL MODE
CH Function Value Details
CH 1 FOG
000-005 OFF
006-255 ON
→
from low volume to high volume
CH 2 BUBBLES
000-005 OFF
006-255 ON
CH 3 FAN
000-005 OFF
006-255 ON
→
from low speed to high speed
CH 4 DIMMER 000-255
MANUAL COLOR settings
CH 5 RED 000-255
CH 6 GREEN 000-255
CH 7 BLUE 000-255
CH 8 AMBER 000-255
CH 9 STROBE
000-015 Strobe OFF
016-255 Strobe (slow to fast)
CH 10
COLOR
MACRO
000-015 NO color
015-024 Red
025-045 Green
046-066 Blue
067-087 Amber
088-108 Light Blue
109-129 Yellow
130-150 Purple
151-171 White
172-213 Color Fade with speed control 172=Slow to 213=Fast
214-255 Color Scroll with speed control 214=Slow to 255=Fast
CH 11
Bubble
Cleaning
000-005 OFF
006-255 Cleaning mode ON
OVERHEAD RIGGING
IMPORTANT
The unit must always be installed so that the bottom of the unit is perfectly horizontal. The
unit must not be inclined forward, otherwise the bubble fluid will leak.
Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials should
be used, the installed device should be inspected regularly for safety.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
•
The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
•
Before rigging make sure that the installation area can hold a minimum point load of
10times the device’s
weight.
•
Always use a certified safety cable that can hold 12times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•
Don’t cover any ventilation openings as this may result in overheating.
•
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.