Briteq B04751, Руководство по эксплуатации

Страница: 6 / 12

ENGLISH OPERATION MANUAL
BRITEQ
®
4/8 BT-BUBBLEFOG
FAN SPEED
Used to set the speed of the fans when the machine is used in MANUAL or TIMER mode or with the
wireless remote controller. This will define how far the smoke/bubbles should be blown away.
•
Press the MENU button until FAN SPEED is shown on the display.
•
Use the DOWN and UP buttons to select a value between 1% (slow speed) and 100% (max speed).
•
Once the correct mode is shown on the display, press the ENTER button to confirm.
REMARK: when you set the speed to 100% and Bubbles are used, the maximum speed will be
automatically reduced to the maximum speed for the use with bubbles. This is to prevent the bubbles
from being blown to pieces. When no bubbles are used, the speed will go to 100%
LED COLOR
Used to set the color that should be produced when the machine is used in MANUAL or TIMER mode
or with the wireless remote controller
•
Press the MENU button until LED COLOR is shown on the display.
•
Use the DOWN and UP buttons to select the desired color mode:
•
OFF
•
RED
•
GREEN
•
BLUE
•
AMBER
•
CYAN
•
YELLOW
•
PURPLE
•
WHITE
•
SLOW FADE
•
FAST FADE
•
SLOW SCROLL
•
FAST SCROLL
•
Once the correct mode is shown on the display, press the ENTER button to confirm.
INTERVAL SET
Used to set the interval time between each program activation
•
Press the MENU button until INTERVAL SET is shown on the display.
•
Use the DOWN and UP buttons to select an interval between 1 and 600 seconds.
•
Once the correct interval is shown on the display, press the ENTER button to confirm.
DURATION SET
Used to set the duration of the program
•
Press the MENU button until DURATION SET is shown on the display.
•
Use the DOWN and UP buttons to select a duration between 2 and 255 seconds.
•
Once the correct duration is shown on the display, press the ENTER button to confirm.
CLEAN MODE
Used to automatically clean the fluid tubes after each use;
WE STRONGLY ADVISE TO SWITCH THIS FUNCTION ON ;
•
Press the MENU button until CLEAN MODE is shown on the display.
•
Use the DOWN and UP buttons to select ON (automatic leaning activated) or OFF (automatic cleaning
deactivated).
•
Once the desired mode is shown on the display, press the ENTER button to confirm.
FIRMWARE VERSION
Used to check the installed firmware version
•
Press the MENU button until FIRMWARE VERSION is shown on the display.