manualshive.com logo in svg

Britax UNITY, Инструкция по установке и эксплуатации

Поделиться
Скачать
Britax UNITY Скачать руководство пользователя страница 39

39

Click

TO CLEAN HARNESS BUCKLE:

If sticky liquids such as baby formula, fruit juice, etc. get inside your Harness 
Buckle, it may become sluggish. An indication of a sluggish Harness Buckle is that 
you cannot hear a click when engaging the Harness Tongues. To restore the Harness 
Buckle to good working order it needs to be cleaned as 
follows: 

A. 

From the underside of the restraint pull each crotch 3-bar 

slide then turn 3-bar slide and push through each slot to 
remove the Harness Buckle from the restraint.

B. 

Place the Harness Buckle under warm (max. 40 degrees 

Celsius) running water as shown below. Let the water run 
through the mouth of the buckle for five minutes.

C. 

Engage and disengage the Harness Tongues and Buckles 

several times until a strong audible click is heard.

D. 

If you still cannot hear a strong audible click after 

engaging the last Harness Tongues into Buckle,then repeat 
cleaning several times. If the Harness Buckle cannot be 
returned to its original working condition then contact 
Britax Childcare Customer Service.

E. 

Refit the harness buckle to the restraint with the red button 

facing out & feeding each 3-bar slide through appropriate 
slot (see page 18).

CARE & MAINTENANCE

Body

3- bar 
slide

Cover

BUCKLE OPERATION

To ensure the buckle remains operational the inside of the buckle must be kept free 
of liquids, sand, dirt, fluff, food or similar substances. If the buckle is not operating 
or does not have the click when second tongue is inserted then the buckle needs to 
be washed or replaced. Contact our Customer Service Department for assistance.

Содержание UNITY

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды