Britax UNITY, Инструкция по установке и эксплуатации

Страница: 3 / 64

INTRODUCTION
3
To be used only in a rearward-facing position for an infant until their shoulders reach
the shoulder height marker (approximately 12 months of age).
Continue to use this infant restraint until the child reaches this limit.
Infants are at risk of serious injury if they face forward too early.
TO BE USED WITH A LAP-SASH OR LAP-ONLY SEATBELT IN THE BACK OF MOST
CARS WITH FORWARD FACING SEATS.
CAREFULLY READ ALL THE INSTRUCTIONS FOR INSTALLATION. IN THE EVENT OF
DOUBT ABOUT THE METHOD OF INSTALLATION, CONSULT BRITAX CHILDCARE OR
AGENT OR A CHILD RESTRAINT FITTING STATION AUTHORISED BY A RELEVANT
TRANSPORT AUTHORITY OR, IN NEW ZEALAND, THE AGENT FOR THE CAR.
No child restraint can guarantee absolute protection from injury in every crash.
However, to ensure that your child gets all the protection designed into the restraint,
PLEASE READ AND FOLLOW THESE INSTRUCTIONS EXACTLY and use only
Safe-n-Sound recommended parts and accessories.
THIS RESTRAINT MUST BE ATTACHED TO A CHILD RESTRAINT ANCHORAGE
POINT IN THE CAR. REFER TO CAR OWNER’S HANDBOOK FOR LOCATION OF
ANCHORAGE POINTS. REFER TO A CHILD RESTRAINT FITTING STATION IF NO
ANCHORAGE POINTS ARE IN THE MOTOR CAR.
Britax Childcare Pty. Ltd. continues to provide care for your children when travelling
in motor cars with a range of child restraints suitable throughout their childhood.
This instruction book can be stored in the base of the Carrier for future reference.
The Carrier is suitable for fitting to a variety of Britax, Steelcraft and BOB
Strollers using one of the adaptor systems. For compatible Strollers refer to
www.britax.com.au.
Britax Stroller Click & Go™ Adaptor is required for some strollers and if not fitted
then it is available as a separate purchase.