44 |
Care & Maintenance
General Maintenance & Repair
•
Ensure all safety devices, locks, harness, and brakes are in
working order.
•
Ensure all joints and folding areas move freely as intended.
•
Should any moving or locking parts become stiff or hard to
operate, ensure these are free from tension, or dirt by wiping
clean with a damp cloth to remove any dirt, sand, or debris.
Allow to dry and lightly spray with a dry silicon lubricant. Please
carefully read the lubricant instructions prior to use.
•
Ensure wheels are regularly cleaned with a damp cloth by
removing dirt, sand, or debris. Allow to dry and lightly spray
the wheel pivot pin with a dry silicon lubricant to keep the
wheels moving smoothly. Please carefully read the lubricant
instructions prior to use.
•
Regularly spray all moving parts with a dry silicon lubricant.
Please carefully read the lubricant instructions prior to use.
•
Ensure all connecting rivets and screws are secure.
Tighten if required.
•
If there are compression marks on the tyres, use a domestic
hair dryer to gently warm (DO NOT OVERHEAT) the tyre and the
compression marks should slowly disappear.
•
To maintain the safety and longevity of the stroller, seek prompt
repairs or replacement for bent, torn, worn, or broken parts. Do
not continue to use the stroller if unsafe.
•
All repairs should only be carried out by an authorised Britax/
Steelcraft repairer. Only Britax/Steelcraft replacement parts
should be used with the stroller. It may be unsafe to use parts
supplied from another manufacturer.
General Tips
Do not store the stroller in your car
for prolonged periods of time
during summer as it may lead to damage to some of the plastics
components.
Do not leave the stroller in direct sunlight
for extended periods
of time, as colours of some fabrics may fade, and tyres may
deteriorate.
Do not fold or store the stroller if damp or wet
, as fabric may
develop mould or mildew. Always store the stroller inside in a dry,
well-ventilated area.
Do not place heavy objects on top of the stroller
as it may alter
the shape.
Should you have any further questions on care & maintenance
of the stroller, please contact our Consumer Service Team at:
Attaching & Removing Britax B-Safe 35 (for NZ market)
B
Press firmly down on
the Click & Go
™
adaptors
until you hear a ‘click’
which indicates the
baby capsule has locked
into position.
Pull up the baby capsule
to ensure it is locked into
the stroller frame.
B
C
Pull and hold the
release lever on the
back of the car seat
and lift up to remove
from the stroller.
C
A
Engage the brake.
Align the B Safe capsule
with the Click & Go
™
adaptors. The baby
capsule must be facing
the handle.
A
Baby Capsule
Sold Separately
PLEASE NOTE:
These instructions are for installing
and removing the baby capsule on the stroller only.
•
For installing and proper use of the baby capsule
in the car, please follow the instructions manual
provided with the baby capsule.
•
Ensure the baby is secured in the baby capsule with
the harness at all times. Refer to the baby capsule
instruction manual regarding placing and securing
your baby in the baby capsule.
Содержание Steelcraft one 2
Страница 51: ...ONE 2V2 51 Notes ...
