Instructions for Installation & Use
- Series No. BS4900A-020130
Instructions for Installation & Use
- Series No. BS4900A-020130
27
26
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
CHILD USE
(BOOSTER SE
AT
MODE WITH CHILD HARNE
SS
)
Hook the Child Harness attachment clip (1) onto booster seat VERSATETHER™Catch (2A).
Then hook booster seat attachment clip (2B) onto vehicle anchor fitting (3). Ensure that none of
the straps are twisted or passing over any sharp edges.
INSTALLING SAFE-N-SOUND PROTECTA PLUS™CHILD
HARNESS WITHOUT EXTENSION STRAP INTO VEHICLE
CHILD HARNESS PREPARATION
CHILD HARNESS PREPARATION
1. Attachment Clip from Child Harness.
2A. VERSATETHER™ Catch.
2B. Booster seat Attachment Clip.
3. Anchor Fitting in the car.
1
2A
3
2B
1
Child Harness Attachment Clip attaches to
the VERSATETHER™
2A
2B
INSTALLING SAFE-N-SOUND PROTECTA PLUS™ HARNESS
WITH EXTENSION STRAP INTO VEHICLE
An adjustable extension strap is supplied with the Child Harness. Hook the Safe-n-Sound
Protecta PLUS™ Harness clip first onto the extension strap catch, then hook the extension
strap clip onto the VERSATETHER™ Catch on the Booster Seat top tether strap as shown
below. Ensure that none of the straps are twisted or catching on sharp edges. Adjust the
Booster Seat top tether strap (refer to page 21) first then remove excess slack from the
extension strap by pulling the adjuster strap as illustrated below.
Pull to
remove
slack
Attachment Clip
attaches to the
VERSA
TETHER™
Catch
To lengthen the Adjustable Extension strap
rotate the adjuster and pull the main strap.
Pull to remove
slack
Pull to
lengthen
Rotate the
Adjuster to
lengthen
Always attach the hook and remove the slack.
This booster seat is only approved for use with Safe-n-Sound Protecta PLUS
™ child harness
Series 220/2013 and Series BS0220-020133.
