Instructions for Installation & Use
Instructions for Installation & Use
62
63
To remove headrest cover:
Step 1.
Lift headrest to the highest position and
unclip press studs on both sides, then
unhook clips on both sides attached
under headrest wings.
Step 2.
Behind the headrest reveal the hidden
elastic, lift out and remove elastic over
and away from headrest.
Peel headrest cover away.
To remove cover:
Step 1.
Lift headrest to the highest position.
Open door at the back of the child
seat and unhook elastic loops.
Step 2.
Recline child seat to reveal elastic
loops at the lower front of the child
seat and remove.
Step 3.
Unclip cover press studs from
CLICKTIGHT base cover found inside
child seat.
Step 4.
Open CLICKTIGHT frame and unhook
clips inside the child seat as shown.
Step 5.
Peel cover over headrest and harness
adjuster button, feed through harness
adjuster straps.
To remove CLICKTIGHT frame cover:
Step 1.
Open CLICKTIGHT frame and unhook
elastics from underneath.
Step 2.
Feed over CLICKTIGHT button
housing.
TO REMOVE COVER FOR WASH:
NOTE: There is no need to disconnect the
shoulder harness assembly straps from restraint.
Step 1.
Remove the restraint from vehicle.
Step 2.
Disengage the harness tongues from
the harness buckle.
Step 3.
Remove any accessories, infant insert,
crotch pad and shoulder pads (if
supplied).
3
1
2
1
3
4
1
CARE AND MAINTENANCE -
REMOVE COVER
CARE AND MAINTENANCE -
REMOVE COVER
Unhook
clip inside
child seat
2
