Instructions for Installation & Use
Instructions for Installation & Use
32
33
OPEN ADVANCED
SIDE IMPACT
CUSHION TECHNOLOGY:
NOTE. The SICT system should not be
used if the child seat is in the centre
position.
For further information on SICT refer to
page 9.
Step 1.
Rotate the SICT anti clockwise to full
extension on the preferred door side.
If at full extension the SICT makes
contact with the vehicle interior, reduce
the extension by rotating clockwise,
keeping it as close as possible to full
extension (finger clearance)
Step 2.
Check the top tether route is above the
SICT and not below.
HOW TO USE - HEADREST AND
SHOULDER HARNESS:
Step 1.
Press top tether adjuster button and
Step 2.
Lengthen top tether strap fully (if
desired).
Step 3.
Press harness adjuster button.
Step 4.
Place your hand under both shoulder
harness straps, then pull shoulder
harness straps to lengthen.
Step 5.
Disengage buckle by pressing red
button.
Step 6.
Lift lever to adjust headrest/ harness
slots
3
4
Press
1
SETUP -
OPEN ADVANCED SIDE IMPACT CUSHION
TECHNOLOGY FOR REARWARD FACING
SETUP
- HEADREST AND SHOULDER HARNESS
FOR
REARWARD FACING
Lift
6
5
Press
Pull
1
Press
Pull
2
