Britax PARKWAY SG, Руководство пользователя

Страница: 9 / 31

14 15
Before you use the Parkway SG booster seat for the first time,
you will have to complete the assembly steps below.
Attaching the Backrest
IMPORTANT: Keep fingers away from moving
parts to avoid potential injury.
1 Detach the elastic loops of the base cover
and armrest covers from the back of the
booster seat base (Fig. A).
2 Place the base on a flat surface. From the
child’s left side of the booster seat, align
the backrest hinge cylinder with the hinge
slot on the base.
3 Push the backrest hinge all the way into
the base hinge slot (Fig. B).
IMPORTANT: DO NOT rotate the backrest
until the cylinder has been completely inserted
into the base hinge slot. Rotating the backrest
before it has been completely inserted may
result in damage to the booster seat.
4 Rotate the backrest up until it doesn’t rotate
into the flat position under its own weight
(Fig. C).
5 Attach the elastic loops of the base cover
and armrest covers to the elastic retainers
on the back of the booster seat (Fig. D).
a
b
c
d
Removing the Backrest
1 Place the booster seat on a flat surface.
2 Detach the seat cover and armrest covers
from the base by unhooking the elastic
loops from the elastic retainers on the
back of the base (Fig. E).
3 Push the backrest down until it lies flat
(Fig. F).
4 Slide the backrest from the child’s left
side of the base (Fig. G).
5 Attach the elastic loops of the base
cover and armrest covers to the elastic
retainers on the back of the base (Fig. H).
NOTE: Store the backrest in a safe place.
e
f
g
h
Using the Child Seat Using the Child Seat