Britax PARKWAY SG, Руководство пользователя

Страница: 11 / 31

18 19
3 Feed the end of the SecureGuard
adjuster webbing through the
SecureGuard adjuster (Fig. D).
4 Pull the webbing to remove slack from
the SecureGuard adjuster.
5 Move the SecureGuard clip to the
center of the SecureGuard webbing.
The lower edge of the SecureGuard clip should be level with
the child’s upper thighs once they have been secured in the
booster seat.
SecureGuard™
Britax recommends using the SecureGuard to
achieve best vehicle seat belt placement. The
SecureGuard clip should hold the lap part of
the vehicle seat belt in place. The SecureGuard
clip should be adjusted to keep the lap part of
the vehicle seat belt positioned low across your
child’s upper thighs (Fig. A). Ensure the bottom
edge of the SecureGuard clip is level with your
child’s upper thighs, however, the clip itself
should not press into your child’s upper thighs.
IMPORTANT:
The lap part of the vehicle
seat belt must not rest on the child’s
abdomen.
Adjusting SecureGuard Fit
To Shorten:
1 Locate the SecureGuard adjuster under
the base. See page 13.
2 Pull the SecureGuard adjuster away
from the base.
3 Feed the webbing through the
SecureGuard adjuster (Fig. B).
4 Pull the end of the SecureGuard adjuster webbing to
tighten (Fig. C).
To Lengthen:
1 Locate the SecureGuard adjuster under the base. See
page 13.
2 Pull the SecureGuard adjuster away from the base.
Pull the cup holder out from
the booster base to use.
Push the cup holder into the
booster base to store.
IMPORTANT:
• DO NOT use with hot liquids.
• DO NOT step on or put excess weight on the cup holder.
Using the Child Seat Using the Child Seat
a
b
c
d
Using the Retractable Cup Holders