manualshive.com logo in svg

Britax ISOFIX COMPATIBLE, Инструкция по эксплуатации

Поделиться
Скачать
Britax ISOFIX COMPATIBLE Скачать руководство пользователя страница 79

Instructions for Installation & Use 

79

The following instructions apply to accessories that may be supplied with this restraint at point 
of purchase. The accessories are for comfort use only. Use of aftermarket accessories, which 
are accessories not provided with this 

child restraint, can reduce the safety provided by the 

child restraint and may cause injury or death. Always follow the instructions covering the use 
of accessories provided with this child seat and the instructions provided with the accessory. 
If an aftermarket accessory is used that is not recommended by 

Britax

®

, ensure that the 

accessory is compliant with AS/NZS 8005 and is stated as suitable for use with this specific 
child restraint.

EZ BUCKLE 

(If supplied)

The EZ Buckle makes it easier to place your child 
in and out of the child seat. It prevents your child 
from sitting on the buckle when seated in both 
rearward and forward facing modes.

To remove

Feed the crotch buckle through the EZ buckle 
slot. Remove EZ Buckle.

To replace

Feed EZ Buckle through base cover front slot. 
Feed crotch buckle through EZ buckle slot. EZ 
Buckle is behind the buckle. See illustration C.

Shoulder 
Pads

EZ Buckle 

SHOULDER PADS 

(If supplied)

Shoulder Pads give extra comfort for your child 
when using the harness. They're easy to remove 
and it makes washing them a breeze - unclip the 
studs to clean them and fit them back onto the 
shoulder harness straps once done. 

A

B

C

ACCESSORIES

Содержание ISOFIX COMPATIBLE





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды