- 8 -
Changing the height of the shoulder straps
IMPORTANT - You must adjust the height of the shoulder straps before
you install your child seat in a car.
Removing your child from the First Class Si
To help prevent the harness from
twisting when you remove your child
from the seat, loosen the harness by
pulling below the chest pads, press the
harness buckle button to undo the
harness and then lay the shoulder straps
on the outside of the seat as shown.
Carefully place the First Class Si on the floor.
With one hand press in and hold the harness
release button. With your other hand below
the chest pads, pull the shoulder straps
forward as far as possible to loosen the
harness.
1
With the First Class Si fully reclined, open the
seat-belt guard at the back of the shell. Pull
the yoke out from behind the seat and unhook
one shoulder strap.
2
Handy Tip
-
You will find it
easier to do one shoulder strap
at a time and make sure that the
buckle is fastened.
63513_BBO-604-04_pages
12/16/03, 11:56 AM
8