Britax First Class Si, Руководство пользователя

Страница: 21 / 28

- 20 -
The First Class Si should now be secure. To
check pull forward firmly on the harness.
There should be little or no movement.
13
IMPORTANT – after installing the First Class Si you need to check the position
of the seat-belt buckle (see "Check the position of the seat-belt buckle").
If in any doubt contact our Customer Service helpline on 01264 386034.
If, after following the above instructions, your
seat-belt buckle looks like this the First Class Si
should now be secure. To check this try to pull
the seat forward by the harness. It should feel
firm, not loose.
Check the position of the seat-belt buckle
IMPORTANT – If, after using the
alternative routing, your seat-belt
buckle still rests on the frame as shown,
the First Class Si may be dangerous to
use. UNDER NO CIRCUMSTANCES
should any seat-belt routing other than
those described here, or on the child car
seat, be used. Contact our Customer
Services Helpline on 01264 386034 for
further advice.
✘ ✔
14
IMPORTANT – Once installed,
the seat-belt must be routed
between the shell and tubing ON ONE
SIDE ONLY - The side nearest to the
buckle.
✘
✔
63513_BBO-604-04_pages 12/16/03, 11:56 AM 20