Installation
15
Installation
14
5
Pull the shoulder portion of the
seat belt tightly through the lock-
off to remove slack (
Fig. D
).
66
Hold the shoulder belt tight, then
flip the lock-off arm up until a pos-
itive click is heard (
Fig. E
).
IMPORTANT:
Lock-off is not
engaged and vehicle belt is not
secured until a click is heard when
closing the lock-off.
7
Verify that the seat belt is tight
and the child restraint is secure.
See
Checking Buckle Position
on
Page 17.
Installation can be improved by the
use of the Versa-Tether
™
(
see
page 16
).
R
Reem
moovvaall
To remove the child restraint, unfasten the seat belt and reverse the
above directions.
D
FFoorrw
waarrdd FFaacciinngg
Lap Belt Installation
Figure A
illustrates a typical lap belt
configuration.
NOTE:
Protective cover should be
in place when LATCH is not in use.
1
Place the child restraint facing
forward on the vehicle seat.
2
Pass the seat belt through both
side slots.
33
Fasten the seat belt, then veri-
fy that the seat belt is not twisted
(
Fig. B
).
4
Press child restraint into vehicle
seat, while removing slack from the
lap portion of the seat belt (
Fig. C
).
5
Verify that the seat belt is tight
and the child seat is secure.
See
Checking Buckle Position
on
Page 17.
Installation can be improved by the
use of the Versa-Tether
™
(
see
page 16
).
R
Reem
moovvaall
To remove the child restraint,
unfasten the seat belt and reverse
the above directions.
B
A
C
E
P2170_EXP_R01.qxd 5/21/2007 9:31 AM Page 16
