11
How to Care for Your Cruiser
Putting On The Cover - Step 1
Pull the cover over the bottom of
the Cru i s e r. Stop before you cover
the small holes for elastic ties.
Putting On The Cover - Step 2
Take hook end of one of the elas-
tic ties attached to the inside of
the cover and push it through the
hole. You may need to use a
straw or pencil to push it thro u g h .
Putting On The Cover - Step 3
Feed the other part of the tie
t h rough the bottom of the head
s u p p o rt guide. Attach it to the
hook end of the tie. Repeat
steps 2 & 3 for the other side.
Putting On The Cover - Step 4
Pull the cover over the Cru i s e r.
Push the cover flap back behind
the head support and fasten it
to the Ve l c ro strips. Fasten the
zip at the top of the cover.
10
How to Care for Your Cruiser
Taking Off the Cover - Step 3
Gently lift up the cover flap
and pull it out from behind
the head support.
Taking Off the Cover - Step 4
Sit the Cruiser up. Unzip the
cover at the top and pull it
down until you see the two
elastic ties near the bottom
of the head support guides.
Taking Off the Cover - Step 5
Tu rn the Cruiser onto its fro n t
and undo both elastic ties. Pull
the ties through to the fro n t
and slip the cover off .
Taking Off the Cover - Step 6
The Cruiser should now look
like this.