background image

                                                                                

Section 1     Introduction 

 

 

Brister’s welcomes you to its growing family of new 
product owners. This Brister Utility Vehicle UTV is a 
light utility vehicle that has been designed with care 
and built by skilled workers using quality materials. 
Proper set-up, maintenance and safe operating 
practices will help you get years of satisfactory use 
from this vehicle. 
 

Safety First 

Brister’s is fully aware of the need for safe operating 
procedures around all of our equipment. We hope yo
will make a sincere effort to put safety above a

ll other 

riorities. The Brister Utility Vehicle was designed and 

 

 

pared to instruct you in the 

al 

end each section in this 

anual to develop an understanding of your vehicle and 

 a 

The Operator’s Section is designed to help familiarize 

intenance. Read this manual 

the recommendations to help ensure safe 

and efficient operation. 
 
* The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance. 
 
* To order a new Operator’s or Parts Manual contact 

thorized dealer. 

              

p
built for work, recreation, and enjoyment; however, 
improper and irresponsible operation could result in 
serious injury or death. Since this is an off-road vehicle,
operators will seldom see the road safety and warning 
signs they are accustomed to seeing on highways and 
public streets. This places additional responsibility on
the driver to operate this vehicle well within the safe 
operational limits and capabilities of the unit. 
 
This manual has been pre
safe and responsible operation of your Brister Utility 
Vehicle. Read and abide by all safety alert information 
about this vehicle. If you do not understand any part of 
this manual, contact your local dealer for additional 
information and clarification. As the operator of this 

iece of equipment, you are in complete control. Only 

p
you can prevent an accident from happening. 
 

Using This Manual 

* Prior to any vehicle operation it is absolutely essenti
that you read and compreh
m
for your safety. After reviewing this manual, store it in
dry and easily accessible place for future reference. 
 

you with safety, assembly, operation, adjustments, 
troubleshooting, and ma
and follow 

y
  

our au

          

 

 

Brister’s Design & Manufacturing Co. LLC 

Toll Free PH: 1-866-646-5278 

d, 

 

n, 

rear differential. 

lso unlike an ATV’s one person “straddle saddle” seat, 

e Brister Utility Vehicle sports dual headrest 

ushioned seats with seat belts mounted in a highly 

gers 

shing water and mud. The Brush Guard Bar 

Fax: 1-866-329-5278 

www.bristers.com

 

Terminology 

Right-hand and left-hand as used in this manual are 
determined by facing the direction the vehicle will travel 
while in use unless otherwise stated. 

 
 
Getting Acquainted with your Utility Vehicle 

This off-road utility vehicle is a very unique vehicle 
designed exclusively for off-road use. It is not designe
properly equipped, or licensed to be safely operated on 
public streets and highways. This vehicle is designed to
carry two people and a limited amount of gear or cargo 
comfortably and safely over rough terrain that was onl
accessible by ATV’s in the past. 
 
Unlike ATV’s that have handlebar steering, Brister Utilit
Vehicle’s have a steering wheel with easy handling 
rack-and pinion steering. The steering’s tight turning 
radius makes this vehicle more maneuverable than 
most ATV’s. Its four wheeled independent suspensio
large diameter hi-flotation tires and high center-frame 
ground clearance adds up to excellent stability and a 
smooth ride over rough terrain. Outstanding two 
wheeled rear traction drive is achieved by using 
premium off-road ATV type tires in tandem with the 
engine mounted directly in front of the 
 
A
th
c
styled and protective full length body. Two passen
can ride comfortably in this vehicle protected from 
spla
mounted to the vehicle’s frame provides protection 
against low hanging limbs and briars. 
        

 
 
 

 

3

Содержание CHUCK WAGON





































































Отзывы: