BRISTERS CHUCK WAGON, Руководство оператора

Страница: 21 / 68

Supp
Brister 4x4 Utility Vehicle
W-413
This
tional features,
ope e Brister Utility Vehicle
4x4
Fe
peration of Four Wheel Drive
eatures
he rear axle is equipped with a manually operated
ck. It is engaged (locked) by moving the
ifferential lever to the left and down. Locking the
ifferential sends equal power to both rear wheels for
etter traction. It may be used in both 2WD and 4WD
odes.
ote: Locking the differential on paved or hard
urfaces may increase steering effort and tire wear.
Maint
Hyd
pressur
Bef
d
nd the front differential gear box. Fill to
T 3 brake fluid.
If you notice that the brake pedal feels spongy or the
vehicle is not stopping well, take the vehicle to a
qualified service center.
Front Differential Gear Box – It is recommended that
the oil be changed once every 2000 miles (about 150
to 200 hours). To change the oil, follow each step on
the procedure listed below.
ug located on the
bottom of the gear case using a 7/16” socket.
all using a new nylon washer
lement:
CW-413, T
supplement covers the addi
ration and maintenance of th
atures
•
13 hp, 390cc Honda engine
•
Electric 4x4 selection
•
Auto-Locking front differential
•
Manual locking rear differential
•
4 wheel hydraulic brakes
o
Front disk
o
Rear drum
•
Long travel strut front suspension
O
F
T
differential lo
d
d
b
m
N
s
To switch to four wheel drive, the front wheels are
engaged simply by flipping the dashboard switch to
4WD. In 4WD mode power is automatically sent to the
front wheels when the rear wheels lose traction.
Warning: Bring engine to an idle before
selecting 4WD mode. Sudden engagement of
4X4 switch under power may damage drive
train. Failure to do so may void warranty.
Because the power transfer is automatic, you may
operate the vehicle in 4WD mode continuously without
affecting steering effort or tire wear.
2. Let all the oil drain out of the unit. Catch and
discard the oil properly.
3. Be sure to clean off any debris on the drain
plug and reinst
enance
raulic Brakes – Hydraulic Brakes use fluid
e to transfer the braking force to the wheels.
ore riving the vehicle each day, check the fluid
level in the reservoir. The reservoir is located under
the hood behi
the MAX line with DO
1. Remove the oil drain pl
Gear Box
Oil fill
21