Bristan SM385 W, Инструкция по установке и руководство пользователя

Страница: 3 / 24

22 3
•
Please read these instructions thoroughly and retain for future use.
•
All products manufactured and supplied by Bristan are safe
provided they are installed, used correctly and receive regular
maintenance in accordance with these instructions.
• If you are in any doubt about your ability to install this product
safely you must employ the services of an experienced qualified
plumber/electrically qualified person.
•
Warning: Do not operate the shower unit if you suspect it is
frozen. Do not site the shower unit where it might be subjected to
freezing conditions.
•
Do not install this shower unit in a room/environment without
adequate ventilation or an extractor fitted. This is required to
prevent condensation forming within the unit.
•
Do not operate the shower unit if the showerhead or spray hose
has been damaged or is blocked.
•
Do not block the flow of water from the showerhead, by placing it
(smothering it) on your hand or any other part of your body or
foreign object.
•
Do not operate the shower if the water stops flowing during use
or if the water is leaking from the shower unit itself. Turn off at the
mains electrical supply and refer to the Troubleshooting section
(see page 18) or contact Bristan Customer Services (see page 19).
•
Do not crush or kink the shower hose, this could damage the
hose, cause leaks and activate the pressure relief device (PRD).
General Safety
•
Always switch off the power at the consumer unit and isolate the
electrical supply before making any electrical connections or if you
have to remove the cover of an installed unit.
•
The unit
must
be mounted on the finished wall surface (usually
tiled). Under no circumstances must you tile up to or seal around
the unit as this may prevent air circulating and condensation
escaping.
•
This shower unit must not be modified* in any way as this will
invalidate the guarantee.
* Except for top left pipe entry (see page 9) where the product has
been designed to be modified by the installer.
Important Safety Information
BEAB (British Electrotechnical Approvals Board) approval of safety.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.