3.
Insert riser rail
Insert the plastic bracket insert as shown
into the wall bracket and slide the riser rail
down through the bottom wall bracket
ensuring the two holes in the riser are on the
top
4.
Fit hose retainer & slider
Push the hose retainer (first) and slider
down onto the riser rial, ensuring they are
the correct way up - as shown.
5.
Attach top wall bracket
Push the top wall bracket onto the riser rail,
ensuring the rail is vertical mark the centres
of the fixing holes in the top wall bracket
onto the wall surface.
Remove the top wall bracket and drill
suitable holes and insert the wall plugs
supplied.
Insert the plastic bracket insert into the top
wall bracket and refit the wall bracket onto
the riser rail. Align the fixing centres up with
the holes and secure in place using the
screws provided.
6.
Fit end caps
Push-fit the wall bracket end caps onto
position to cover the fixings.
7.
Connect shower hose to shower valve
Screw the shower hose onto the mixer
valve ensuring that the rubber washer is
fitted.
8.
Connect shower hose to showerhead
Screw the shower hose onto the
showerhead ensuring that the rubber
washer is fitted.
Place the showerhead into the slider.
Bracket
Insert
Bottom wall
bracket
End cap
Slider
Hose
Retainer
Top wall
bracket
Bracket
Insert
Fixings
Installation –
Shower Kit
Need Help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
18
