The shower kit is only supplied with
AR3 SHCMT C
1. Mark the position
Position the assembled riser rail on the
wall, bearing in mind the different heights
of people likely to use the shower and the
length of the hose when connected to the
shower.
With the riser rail vertical, mark the wall
bracket positions onto the wall.
Release the slider handle and remove the
slider and wall brackets from the rail.
2. Attach wall brackets
Position the bottom wall bracket onto the
marked position on the wall surface,
ensure it is vertical and mark the centres
of the fixing holes onto the wall. Existing
fixing holes maybe used as the bottom
wall bracket is fully adjustable.
Warning: Please check for any
hidden pipes and cables before drilling
holes in the wall.
Drill suitable holes and insert the wall
plugs. Securely attach the bottom wall
bracket to the wall using the screws
provided.
Slider
handle
Note: If replacing an existing riser
rail, check to see if the existing holes
can be reused or covered by the new
wall
brackets. Try to avoid drilling close to
the edge of tiles, drill in the middle of
the tiles or in the tile joints.
Wall bracket
Wall bracket
Tips: A piece of insulation or masking
tape positioned where holes are to
be drilled and before marking out the
exact position for the fixing holes will
help stop the drill bit from wandering,
particularly on a tiled surface.
When working near a basin, bath or
shower insert plug or cover waste
to prevent losing small parts.
Take care not to drop
tools/equipment into basin, bath or
shower during shower installation.
Installation –
Shower Kit
Wall bracket
Need Help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
17
