4. Fit concealing plate
Note: The concealing plate can be
used as a template by drawing
around the plate and measuring in
by 10mm to give sufficient
clearance.
Run a bead of waterproof silicon
sealant around the inner edge of the
concealing plate.
Slide the concealing plate onto the
shower valve control handles and
apply firm pressure to ensure to
silicon sealant spreads.
5. Fit Shrouds
Screw the shrouds onto the valve
body.
6.Fit Handles
Push the spline adaptors (if required)
onto the valve spindles.
Push the handles onto the spline
adaptors and secure by tightening
the grub screw and push-fit the cap
into position.
Important: All future servicing and
maintenance of the shower valve,
thermostatic cartridge and filters
can be done from the front, so rear
access is not required.
Concealing plate
Installation –
Shower Valve
Need Help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
15
