3
Safety Information
WARNING:
To reduce risk of injury and property damage, you must read this entire guide before assembling,
installing, and operating the filtration system.
WARNING:
In order to ensure safety and to avoid injury and property loss to you and others, please be sure
to follow the following safety precautions. Misuse with ignoring safety precautions may lead to
accidents.
Installation needs to comply with state and local laws and regulations.
•
System must be installed indoors and away from possible environmental damage.
•
Avoid exposing and/or storing the pitcher in an environment under 32˚F (O˚C) or in places with strong
sunlight. This could cause parts of the product to age.
•
Do not place heavy objects on top of the product.
•
Do not place flammable, volatile substances near the product.
•
Do not place the product near a heat source or open fire.
•
Please install the product as close as possible to the floor drain.
•
Do not allow children to operate, touch, approach, or climb on the product without guardians present.
•
Strong magnetic devices nearby may cause fire, product damage, or circuit failure. Wet and dusty areas
may cause circuit damage.
•
When cutting the power Off, do not pull the power cord directly to prevent it from breaking. Keep the plug
clean. Do not plug or unplug with wet hands.
•
If the power cord is damaged, it must be replaced by professionals from the manufacturer, its maintenance
department, or other similar departments. Do not squeeze, fold, knot, or damage the power cord.
•
The product must be installed or moved by professional personnel. Disassembling at your own discretion
may damage the product or cause electric shock.
•
When the water does not meet the municipal water standards (including high sediment content and
excessive residual chlorine, etc.), a professional installer must install a pretreatment device before installing
the pitcher.
•
The optimal water pressure of this product is 0.1-0.4 MPa. If the water pressure is lower or higher than this,
install a pressure-boosting or pressure-reducing device accordingly.
•
In case of product failure, unplug the pitcher, disconnect it from its water source, and contact customer
service.
•
When the ambient temperature is low, the flow rate will decrease, which is an inherent feature of the filter.
•
Replace the filter regularly.
•
To ensure longevity of the pitcher, only use the parts included with this system. For replacement parts,
contact customer service.
•
It is normal for the product to have slight vibration and noise when processing water.
•
If you do not use this product for a long period of time, unplug or disconnect from the power source and
shut off the feed water adapter. Upon first use after an extended period of time, run water for 3-5 minutes.
